Independent comparisons. We may earn from shop links. More info

Multi tool buying guide

Updated: October 2026

You may need to undercut one door frame, scrape old adhesive and sand into a corner, yet the listings put wattage and accessory counts ahead of the choices that decide whether the tool will do those jobs. This multi tool buying guide puts the decisions in a more useful order: choose the power supply, confirm that replacement blades fit, and check that the first box contains the accessory your job needs. The [oscillating multi-tool comparison](/hub/sanders/multi-tool) lines up eight amazon.co.uk listings. Prices and review counts are from those listings on 16 October 2026. This is not a laboratory test. A qualifying purchase through our links can earn a commission at no extra cost to you.

You may need to undercut one door frame, scrape old adhesive and sand into a corner, yet the listings put wattage and accessory counts ahead of the choices that decide whether the tool will do those jobs.

Our top picks

DEWALT DEWALT DCS355N-XJ body

Best overall

DEWALT DEWALT DCS355N-XJ body
8.4/10about £72
View offer
WORX WORX WX696.9 body

Rank 2

WORX WORX WX696.9 body
7.5/10about £65.99
View offer
Enventor Enventor 300W blue

Rank 3

Enventor Enventor 300W blue
7.7/10about £39.99
View offer
On this page
  1. 1.Choose the power supply before the brand
  2. 2.Check the blade mount and replacement supply
  3. 3.Match the first box to the first job
  4. 4.Treat speed, angle and reviews as evidence with limits

Choose the power supply before the brand

A corded multi-tool is usually the simpler purchase when the work will happen beside a socket and may continue for a long time. Recorded corded prices run from about £36.98 to £49.99, with no battery or charger to add. Cordless makes more sense when you move between rooms or already own the battery platform. The WORX WX696.9 at about £65.99 and the DeWalt DCS355N-XJ at about £72 do not include a battery or charger. The WORKPROX at about £69.99 includes a 2.0 Ah battery that reviews describe as proprietary, and the listing says the PD charger is not included. The corded versus cordless guide goes further into runtime and platform costs. UK mains are 230 V, and a corded tool should arrive with a BS 1363 13 A plug. Only the two Enventor 300 W colour listings explicitly state 230 V. The Enventor 500 W, Funguard 400 W and WORKPRO 400 W are described as corded or AC but do not print a voltage figure.

Check the blade mount and replacement supply

An inexpensive tool becomes poor value if the next blade will not fit or cannot be bought. The older OIS-style interface uses a flat hole pattern, while Starlock uses a shaped three-dimensional mount. Standard Starlock accessories are designed to work with standard Starlock heads and many OIS-style tools, but StarlockPlus and StarlockMax are separate fittings. Do not assume that a Plus or Max accessory will fit a basic DIY head. Listing terms such as universal, quick change and tool-free describe convenience, not a verified Starlock interface. Match the accessory maker's compatibility diagram to the exact tool. Enventor reviewers report that the seller's spare blades were difficult to obtain. The Enventor 300 W lever can be stiff, while one Funguard reviewer says its clamp vibrated loose. Fit the accessory with the tool isolated from power, lock it according to the manual, and check that it cannot move before starting.
DEWALT DEWALT DCS355N-XJ body

Testsieger

DEWALT DEWALT DCS355N-XJ body
8.4/10about £72
View offer

Match the first box to the first job

For clean timber such as an uncomplicated door lining, a plunge-cut wood blade is the starting point. If nails or screws may be present, choose a blade explicitly rated for wood with nails. The DeWalt box names one fast-cut wood blade and one wood-with-nails blade. Corner sanding needs a triangular pad and sheets in useful grits. The Enventor 300 W kits list a 90 mm pad and 20 sheets from P60 to P120. WORKPRO lists an 80 mm pad with 15 sheets at 60, 80 and 120 grit, and WORX lists 30 sheets at 80, 120 and 180. Check whether the accessory claim comes from the package bullet or the formal included-components field. Those lines disagree on the Enventor 500 W and Funguard listings. A sanding pad does not turn the multi-tool into a floor sander. The corner sanding and grout guide explains where the triangular pad stops being the sensible choice.

Treat speed, angle and reviews as evidence with limits

Seller-stated speed bands are not a timed cutting ranking. Stated angles include 3°, 3.6°, 4.5° and 5°, while the WORX and DeWalt rows do not state an angle. No cut-speed or vibration test was conducted. DeWalt has 4.8 from 6,205 ratings, whereas WORKPROX has 4.3 from 10 and the Enventor 500 W has 4.8 from 16. The blue and yellow Enventor 300 W listings are both model 23Q1-3 and share one 4.5-from-922 review pool. They are colour variants, not 1,844 independent ratings. If a cut may reach a cable or pipe, or the material may contain asbestos or lead paint, or the timber is structural or part of a fire door, use a competent professional. For routine work, follow the oscillating multi-tool how-to.

Common questions

Does universal or quick change mean Starlock?
No. Quick change describes how the accessory is clamped, while universal is an imprecise compatibility claim. Confirm the mount diagram and exact model. Standard Starlock, StarlockPlus and StarlockMax are not interchangeable labels, and Plus or Max should not be assumed to fit a basic head.
Will StarlockPlus or StarlockMax fit a basic DIY tool?
Do not assume so. Plus and Max are intended for their respective higher-capacity interfaces. Buy against the tool maker's compatibility information and the accessory maker's model list rather than the shape of a product photograph.
What should a useful starter box contain?
For general home work, look for a timber plunge blade, a bi-metal or wood-with-nails blade, a scraper and a triangular sanding pad with stated grits. Your first actual job should decide the list. Budget for replacements even when the initial box looks generous.
Why do the two Enventor 300 W listings share reviews?
They are both model 23Q1-3 in different colours, and their stored review openings overlap. Treat 4.5 from 922 as one shared variant pool. Do not add the counts or use the two colours as separate proof of reliability.
When should you call a professional?
Stop if the cut could reach hidden wiring or pipework, if asbestos or lead paint may be present, or if the timber is structural or forms part of a fire door. A detector is an aid rather than a guarantee, and incoming electrical supply cables can remain live even when the main switch is off.

Related pages

Highest score and corded kit

Multi-tool

Corded vs cordless multi-tool: price of a working tool

How to use an oscillating multi-tool for home cuts

Multi-tool sanding for corners, edges and grout dust

Sources

Public UK sources and amazon.co.uk listings read for this comparison on 16 October 2026. Prices move.

  1. HSE: Cutting and sanding wood (retrieved 16 October 2026)
  2. HSE: Hand-arm vibration regulations (retrieved 16 October 2026)
  3. Control of Noise at Work Regulations 2005, regulation 4 (retrieved 16 October 2026)
  4. Supply of Machinery (Safety) Regulations 2008 (retrieved 16 October 2026)
  5. HSE CIS69: Controlling construction dust with on-tool extraction (retrieved 16 October 2026)
  6. FEIN UK: Starlock FAQs (retrieved 16 October 2026)
  7. Tooled-Up: Making sense of multi-tool accessories (retrieved 16 October 2026)
  8. Kitd: Oscillating multi-tool price bands, 2026 (retrieved 16 October 2026)