Wire tie twister buying guide
Updated: October 2026
The amazon.co.uk titles in front of you all say wire twister. A wire tie twister in this set is one of three hand tools: a spring pull hook, a 1/4 inch hex drill head, or a small plate with holes. This wire tie twister buying guide is the order before the basket: job, then mechanism, then wire, then a price you can check. The [wire tie twister comparison](/hub/fencing-and-wire/wire-tie-twister) tables the 11 listings. Products Compared read them on 16 October 2026. Nothing was twisted in a laboratory. A qualifying purchase can earn a commission at no extra cost to you.
The amazon.co.uk titles in front of you all say wire twister. A wire tie twister in this set is one of three hand tools: a spring pull hook, a 1/4 inch hex drill head, or a small plate with holes.
The amazon.co.uk titles in front of you all say wire twister. A wire tie twister in this set is one of three hand tools: a spring pull hook, a 1/4 inch hex drill head, or a small plate with holes. This wire tie twister buying guide is the order before the basket: job, then mechanism, then wire, then a price you can check. The wire tie twister comparison tables the 11 listings. Products Compared read them on 16 October 2026. Nothing was twisted in a laboratory. A qualifying purchase can earn a commission at no extra cost to you.
Our top picks
| Badge | Product | Type | Drive | Stated size | Note | Price | Offer |
|---|---|---|---|---|---|---|---|
| Best overall |  CYUXING CYUXING drill wire twister set | Drill twister | 1/4 inch hex | 60 mm and 63 mm heads | 4.4 | about £7.99 | View offer |
 NEIKO NEIKO 61025A pull twister | Pull twister | Internal spring | Length n/a | 7.9 | about £17.32 | View offer | |
| Preis-Tipp |  Zeromall Zeromall pull twister 305 mm | Pull twister | Rebound pull | 305 mm | 5.0 | about £7.99 | View offer |
On this page
Match the wire tie twister to the job
Start with the joint, not the brand. A double-loop tie around rebar or a sack wants a hook that takes both loops. A mild-steel fence tail wants a short bar with a hole, and it stops being a hand-tool job once the wire is high tensile. An electrical connector wants a different socket. The head that suits one job is the wrong head for the next.
A pack of double-loop ties is not a twister. Next Day Steel’s guide says ties hold reinforcing bars during the pour and do not add design load, and that you follow the drawing. The bar sits under BS 4449. That standard describes the steel, not the hook. If the drawing names the tie, the drawing wins.
What the mechanism actually does
None of these three mechanisms is a tying gun. A fencing twister is a short bar, no longer than about 100 mm, with a hole for the loose end. A drill-shank twister is a 1/4 inch hex head, run slowly. A pull twister is a hook, about 260 mm to 305 mm where a length is stated. Automatic means the spring returns. It does not feed and cut wire.
The Draper 31059, at about £18.13, is 260 mm with a drop-forged hook. CYUXING, at about £7.99, states head sizes of 60 mm and 63 mm, not the wire. Heryson, at about £5.69, has no stated length. The mild-steel stop is on wire twister for fencing.
Wire, evidence and what is not in the box
Twist mild steel or annealed tie wire, and supply it yourself. Where this set states the box, tie wire is not in it. Gloves appear only on the VANORIAL pack. Labels 9# and 11# are not a British wire gauge unless the page gives millimetres, and none of these drill listings gives the wire that way. A 5.0 from one review is an anecdote. KIPTVO’s 1.0 from one review said the tool would not twist two wire sizes, and the buyer returned it.
Prefer a named length and a review count you can read. The Draper 31059 is 4.4 from 175 ratings and the NEIKO 61025A is 4.2 from 621. The QWORK two-pack is 2.5 from 140, and the UK text is dominated by early breakage. If two fields fight, believe neither until the parcel arrives.
What to pay, and when to stop
These bands are a rule of thumb from this amazon.co.uk batch, not a market index. Entry is about £4.99 to £7.99. Mid reaches the QWORK two-pack at about £9.99. The upper hand tools are the NEIKO 61025A at about £17.32 and the Draper 31059 at about £18.13.
Stop when the job leaves this band. A Makita DTR180, listed by Tooled-Up at £914.95 including VAT, feeds and cuts its own wire. HSE names all-day rebar tying as repetitive work, and a cordless tier as the control. If a consumer tool snaps on first use, the Consumer Rights Act 2015, sections 9 and 19, covers satisfactory quality.
Common questions
What are the three wire tie twister types, and which job fits each?
A short bar with a hole finishes mild-steel fence tails. A 1/4 inch hex drill head spins a tie when you already have a drill and you keep the speed low. A spring pull hook takes double-loop rebar or sack ties. A pack of double-loop ties is the wire, not the tool that spins it.
Does automatic mean the tool feeds and cuts wire?
No. From about £4.99 to £18.13 in this set, automatic means the spring brings the hook back after you pull. A tying gun that feeds and cuts wire is a different machine. None of the 11 listings here feeds a coil and cuts the tail for you.
Is tie wire included with a wire tie twister?
Nowhere in this set is a coil of tie wire clearly in the box. The NEIKO 61025A and the Draper 31059 both list the tool only. You buy mild steel or annealed tie wire separately and match it to the head. Gloves are stated only on the VANORIAL pack.
Can you twist high-tensile fence wire with one of these?
Conservation Handbooks limits a twisted joint to mild steel, because high-tensile wire springs undone. These hooks and bits are not strainers, and the word fencing on a drill-bit title does not change that. If a strained line is moving or has sprung back, stop and call someone who strains fences.
What should 9# and 11# mean on a drill-bit listing?
Treat them as seller labels until the page gives millimetres. Do not convert them into British wire gauge. In this set only CYUXING states head sizes, a 60 mm arc and a 63 mm square, and those figures are the heads, not the wire diameter. KIPTVO names 9# and 11# and prints 10 × 10 × 1 mm, which cannot be the size of the bits.
Which price band is entry, mid and upper in this set?
From this batch only, entry is about £4.99 to £7.99, mid is about £7.99 to £9.99, and the upper hand tools are about £17.32 and £18.13. Draper’s own £36.24 is not the Amazon price. A score of 5.0 from one review does not move a cheap bit up a band. Named picks sit on best wire tie twister.
Related pages
Sources
Public UK sources and the amazon.co.uk listings in this set, last checked on 16 October 2026.
- Conservation Handbooks, joining wire (retrieved 16 October 2026)
- Conservation Handbooks, fencing tools (retrieved 16 October 2026)
- HSE, PUWER overview (retrieved 16 October 2026)
- HSE, repetitive work (retrieved 16 October 2026)
- Draper 31059 bag tie twister 260 mm (retrieved 16 October 2026)
- Hampton Steel, stock fencing (retrieved 16 October 2026)
- BSI, BS 4449 reinforcing steel (retrieved 16 October 2026)
- Consumer Rights Act 2015 (retrieved 16 October 2026)
- Tooled-Up, Makita DTR180 rebar tying tool (retrieved 16 October 2026)
- amazon.co.uk listings in this set (retrieved 16 October 2026)